Quick Search

PO SERIES: Polyolefin Wheels (46 items)

CAPACITY: 150 - 940 LBS.

PO wheels are economical and light weight. The wheels are non-marking and provide floor protection. These wheels are excellent for application where "wash-down" may be required and offer superior resistance to most oil, chemicals, grease, gasoline, solvents, and acid. The Polyolefin wheel has a remarkable ability to withstand impact.

Characteristics:
Temperature -45 to +180 degrees F
Durometer 65 (+/-5) Shore D
Resists Absorption
Injection Molded
Good chemical resistance
Ribbed hub design, 1 1/2" and 2" tread width
Options:
Heavy Duty Polyolefin use POH instead of PO (for higher impact resistance)
High Temperature Polyolefin use POT instead of PO (for temperature up to 550 degrees F)
Metal retaining washers, metal thrust washers, or metal bearings
For plastic thrust washers use "TW" suffix; ex. 420PO64TW


Page: Page Size:
46 Wheels Available

DIAMETER
"INCHES"
TREAD
WIDTH
"INCHES"
HUB
LENGTH
"INCHES"
WHEEL
I.D.
"INCHES"
CAPACITY
"POUNDS"
BEARING
TYPE
WHEEL
NUMBER
APP.
WT. EA.
(LBS.)
2 1 1 1/16 1 1/4 150 PLAIN 210POA0 1/16
2 1/2 1 1/8 1 7/16 5/16 200 PLAIN 2558POB0 3/16
2 1/2 1 3/8 1 5/8 3/8 225 SLEEVE 2558PO20 3/16
2 1/2 1 3/8 1 5/8 3/8 225 BALL 2558POGG 3/16
3 1 1/4 1 1/2 3/8 250 PLAIN 314PO10 1/4
3 1 1/4 1 1/2 1/2 250 SLEEVE 314PO20 1/4
3 1 3/8 1 5/8 3/8 275 PLAIN 388PO10 1/4
4 1 1/2 1 5/8 3/4 420 ROLLER 415PO64 3/4
4 1 1/2 1 5/8 3/4 420 DELRIN 415PO6C 3/4
4 1 1/2 1 5/8 1 3/16 420 PLAIN 415PO60 3/4
4 1 1/4 1 1/2 3/8 300 PLAIN 414PO10 1/2
4 1 1/4 1 1/2 1/2 300 SLEEVE 414PO20 1/2
4 1 3/8 1 5/8 5/16 375 DELRIN 408POGAA 3/4
4 1 3/8 1 5/8 5/16 375 BALL 408POGF 3/4
4 1 3/8 1 5/8 3/8 375 OILESS 408PO20 3/4
4 1 3/8 1 5/8 3/8 375 DELRIN 408POGA 3/4
4 1 3/8 1 5/8 3/8 375 BALL 408POGG 3/4
4 1 3/8 1 5/8 1 1/8 375 PLAIN 408POG0 3/4
4 1 5/8 1 5/8 7/16 420 PLAIN 417POC0 3/4
4 2 2 3/16 3/4 500 ROLLER 420PO64 3/4

Page: Page Size: